fbpx
  • Eugenia L. Dalibón, Ramiro D. Moreira, Daniel Heim, Christian Forsich, Sonia P. Brühl, “Soft and thick DLC deposited on AISI 316L stainless steel with nitriding as pre-treatment tested in severe wear conditions”, Diamond and Related Materials, Vol 106 (2020)   https://doi.org/10.1016/j.diamond.2020.107881
  • Eugenia Dalibon, Raúl Charadia, Amado Cabo, Sonia P. Brühl, “Short Time ion Nitriding of AISI 420 Stainless Steel to Improve Wear and Corrosion Resistance”, Research, Vol22, n°6 (2019), ISSN: 1516-1439 (Print Version), ISSN: 1980-5373 (On-line Version),  https://doi.org/10.1590/1980-5373-mr-2019-0415
  • Laura Silvia Vaca, Juan Pablo Quintana, María Agustina Guitar, Daniel Vega, Sonia Patricia Brühl, Adriana Márquez, “Influence of the Pre-Treatments and Process Temperature on the Adhesion of TiN Films Deposited by PBII&D Over Nitrided Austenitic Stainless Steel”, Materials Research, Vol22, n°5 (2019), ISSN: 1516-1439 (Print Version), ISSN: 1980-5373 (On-line Version). http://dx.doi.org/10.1590/1980-5373-mr-2019-0282.
  • Eugenia Laura Dalibon, Amado Cabo, Jorge Halabi, Ramiro D. Moreira, Kevin Silva, Sonia P. Brühl, “Mechanical and Corrosion Behavior of TiN Coatings Deposited on Nitrided AISI 420 Stainless Steel”, Key Engineering Materials, Vol 813, pp. 135-140 (2019), ISSN: 1662-9809.   https://doi.org/10.4028/www.scientific.net/KEM.813.135.
  • Eugenia L. Dalibon, Jorge N. Pecina, Amado Cabo, Vladimir J. Trava-Airoldi, Sonia P. Brühl, “Freeting and wear resistance of DLC hard coatings deposited on nitrided martensitic stainless steel”, Journal of Materials Research and Technology 8(1): 259-266, (2019).  https://doi.org/10.1016/j.jmrt.2017.12.004.
  • Eugenia L. Dalibón, J. Nahuel Pecina, Mauro N. Moscatelli, Marco A. Ramírez Ramos, Vladimir J. Trava-Airoldi, Sonia P. Brühl, ” Mechanical and Corrosion Behaviour of DLC and TiN Coatings Deposited on Martensitic Stainless Steel”, Journal of Bio- and Tribo-Corrosion (2019) 5:34. https://doi.org/10.1007/s40735-019-0228-6.
  • Eugenia L. Dalibón, Thierry Czerwiec, Vladimir J. Trava-Airoldi, Naureen Ghafoor, Lina Rogström, Magnus Oden, Sonia P. Brühl, “Characterization of DLC coatings over nitrided stainless steel with and without nitriding pre-treatment using annealing cycles”, Journal of Materials Research and Technology, Volume 8 Issue 2, 1653-1662, (2019). https://doi.org/10.1016/j.jmrt.2018.12.002.
  • Eugenia Laura Dalibon Bähler, Jorge Nahuel Pecina, Sonia Patricia Brühl, Amado Cabo, Vladimir Jesús Trava-Airoldi, “Protección de aceros para instrumentos quirúrgicos con recubrimientos duros en base carbono tipo DLC”, Revista Materia, vol 23 n° 2 (2018). ISSN 1517-7076. https://doi.org/10.1590/s1517-707620180002.0398.
  • Francisco Andrés Delfín, Sonia Patricia Brühl, Christian Forsich, Daniel Heim, “Carbon DLC films: Influence of the processing parameters on the structure and properties”, Revista Materia, vol 23 n° 2 (2018). ISSN 1517-7076. https://doi.org/10.1590/s1517-707620180002.0395.
  • Evangelina De Las Heras, Gabriel Ybarra, Diego Lamas, Amado Cabo, Eugenia Laura Dalibon, Sonia P. Brühl, “Plasma nitriding of 316L stainless steel in two different N2-H2 atmospheres – Influence on microstructure and corrosion resistance”, Surface and Coatings Technology 313 (2017) 47-54. https://doi.org/10.1016/j.surfcoat.2017.01.037. 
  • E.L. Dalibón, L. Escalada, S. Simison, C. Forsich, D. Heim, S.P. Brühl, “Mechanical and corrosion behavior of thick and soft DLC coatings”, Surface and Coatings Technology 312 (2017) 101-109.  https://doi.org/10.1016/j.surfcoat.2016.10.006.
  • Schierloh, Gonzalo J., Regis, Matías, Charadia, Raúl, Dalibón, Eugenia L., Brühl, Sonia P., “Comparación del comportamiento al desgaste de un acero AISI 1045 nitrurado y seguido de un temple por inducción”, Avances en Ciencias e Ingeniería, 7(4) 2016. E-ISSN: 0718-8706.   https://www.redalyc.org/articulo.oa?id=323649144001.
  • Eugenia L. Dalibón, Sonia P. Brühl, Vladimir J. Trava-Airoldi, Lisandro Escalada and Silvia N. Simison, “Hard DLC coating deposited over nitrided martensitic stainless steel: analysis of adhesion and corrosion resistance”, Journal of Materials Research 31 (22), (Materials Research Society), pp. 3549-3556, 2016.  https://doi.org/10.1557/jmr.2016.380
  • J.N. Pecina, L.M. Lover, E.L. Dalibón, S.P. Brühl. “Influencia de la nitruración por plasma sobre el comportamiento a la corrosión y la adhesión de recubrimientos DLC sobre acero inoxidable AISI 420”, Avances en Ciencias e Ingeniería, 7(2) 2016. ISSN: 0718-8706.   https://www.redalyc.org/articulo.oa?id=323646310006
  • Sonia P. Brühl, Amado Cabo, Germán Prieto, Walter Tuckart, “Tribological behaviour of nitrided and nitrocarburized carbon steel used to produce engine parts”, Industrial Lubrication and Technology 68:1 (2016) 125-133. ISSN: 0036-8792. http://dx.doi.org/10.1108/ILT-07-2015-0101.
  • Eugenia L. Dalibón, M. Agustina Guitar, Vladimir Trava-Airoldi, Frank Mücklich, and Sonia P. Brühl, “Plasma nitriding and DLC coatings for corrosion protection of precipitation hardening stainless steel”, Advanced Engineering Materials, 2015.  ISSN: 1527-2648. http://dx.doi.org/10.1002/adem.201500411
  • Eugenia L. Dalibón, Daniel Heim, Christian Forsich, Andreas Rosenkranz, M. Agustina Guitar, Sonia P. Brühl, “Characterization of thick and soft DLC coatings deposited on plasma nitrided austenitic stainless steel”, Diamond and Related Materials 59 (2015) 73-79. ISSN: 0925-9635. http://dx.doi.org/10.1016/j.diamond.2015.09.010
  • Ana Gasco Owens, Sonia Brühl, Silvia Simison, Christian Forsich, Daniel Heim, “Comparison of Tribological Properties of Stainless Steel with Hard and Soft DLC Coatings”, Procedia Materials Science 9 (2015), 246–253. ISSN: 2211-8128. http://dx.doi.org/doi: 10.1016/j.mspro.2015.04.031
  • E. L. Dalibon, D. Heim, Ch. Forsich, S. P. Brühl, “Mechanical Behavior of Nitrided 316L Austenitic Stainless Steel Coated with a:C-H-Si.” Procedia Materials Science 9 (2015), 163–170. ISSN: 2211-8128. http://dx.doi.org10.1016/j.mspro.2015.04.021
  • Eugenia L. Dalibon, Mauro Moscatelli, Silvia Simison, Lisandro Escalada, Amado Cabo, Carlos Lasorsa, Sonia P. Brühl, “Corrosion Behaviour of a SiOxNy Coated and Nitrided PH Stainless Steel”, Procedia Materials Science 8 (2015), 29–38. http://dx.doi.org/doi:10.1016/j.mspro.2015.04.045 ISSN: 2211-8128.
  • L. Escalada, S. P. Brühl, S. N. Simison, “Microscopic Investigation of Pitting Corrosion in Plasma Nitrided Austenitic Stainless Steel”, Practical Metallography (Praktische Metallographie) 51, Issue 9 (2014) 689-698. http://dx.doi.org/doi:10.3139/147.110303
  • Eugenia L. Dalibon, Vladimir Trava-Airoldi, Lânia A. Pereira, Amado Cabo, Sonia P. Brühl, “Wear resistance of nitrided and DLC coated PH stainless steel”, Surface & Coatings Technology 255 (2014) 22-27.  http://dx.doi.org/10.1016/j.surfcoat.2013.11.004
  • Eugenia L. Dalibón, Raúl Charadia, Amado Cabo, Vladimir Trava-Airoldi, Sonia P. Brühl, “Evaluation of the mechanical behaviour of a DLC film on plasma nitrided AISI 420 with different surface finishing”, Surface & Coatings Technology 235 (2013) 735-740. http://dx.doi.org/10.1016/j.surfcoat.2013.08.059
  • L. Escalada, J. Lutz, S.P. Brühl, M. Fazio, A. Márquez, S. Mändl, D. Manova, S. Simison, “Microstructure and corrosion behavior of AISI 316L duplex treated by means of ion nitriding and plasma based ion implantation and deposition”, Surface and Coatings Technology 223 (2013) 41-46.   https://doi.org/10.1016/j.surfcoat.2013.02.025
  • E. L. Dalibon, P. Bozzano y S. P. Brühl, “Microestructura de capas modificadas en acero austenítico AISI 316L tratado por nitruración iónica a baja temperatura”, Acta Microscopica, Vol. 22, Nr. 1 (2013) 4-11. ISSN: 0798-4545.
  • U. Cvelbar, M. Modic, J. Kovač, S. Lazović, G. Filipič, D. Vujošević,  I. Junkar, K. Eleršič, S.P. Brühl, C. Canal, T. Belmonte, M. Mozetič, “Plasma functionalization of titanium surface for repulsion of blood platelets”, Surface & Coatings Technology 211 (2012) 200–204. Disponible en el sitio URL http://dx.doi.org/10.1016/j.surfcoat.2012.01.017
  • E. L. Dalibon, C. Lasorsa, A. Cabo, J. Cimetta, N. García, S. P. Brühl, “Tribological Properties of SiNx Films on PH Stainless Steel with and Without Nitriding as a Pre-treatment”, Procedia Materials Science 1 (2012) 313–320. http://dx.doi.org/10.1016/j.mspro.2012.06.042. ISSN: 2211-8128.
  • L. S. Vaca, A. Márquez and S. P. Brühl, “Structural and tribological properties of Ti-TiN coatings obtained with a vacuum arc”, J. Physics: Conference Series 370 (2012) 012032. ISSN: 1742-6588. http://dx.doi.org/10.1088/1742-6596/370/1/012032
  • E. L. Dalibon, S. P. Brühl and D. Heim, “Tribological behavior of DLC films deposited on nitrided and post-oxidized stainless steel by PACVD”, J. Physics: Conference Series 370 (2012) 012029. ISSN: 1742-6588. http://dx.doi.org/10.1088/1742-6596/370/1/012029.
  • S. P. Brühl, R. Charadia, S. N. Simison, D. Lamas, A. Cabo, “Corrosion behavior of martensitic and precipitation hardening stainless steels treated by plasma nitriding”, Surface & Coatings Technology 204 (2010) 3280-3286. ISSN: 0257-8972. http://dx.doi.org/10.1016/j.surfcoat.2010.03.036
  • S. P. Brühl, L. S. Vaca, R. Charadia, J. Cimetta, A. Cabo, “Nitruración Iónica de Aceros Inoxidables Endurecibles por Precipitación”, Rev. LatinAm. Metal. Mater. 2009; S1 (4): 1559-1565.
  • Sonia P. Brühl, Raúl Charadia, Carlos Sanchez and Mariana H. Staia, Wear behaviour of plasma nitrided AISI 420 stainless steel, Int. Journal of Materials Research 7 (2008) 779-786. ISSN: 1862-5282.
  • E. De Las Heras, P. Corengia, M. Brizuela, A. García-Luis, G. Ybarra, N. Mingolo, A. Cabo, S. P. Brühl, Microstructure and wear behavior of DC-pulsed plasma nitrided AISI 316L austenitic stainless steel, Plasma Processes and Polymers 4 (2007) 5741-5745. ISSN: 1612-8869.
  • Linda Gil, Sonia Brühl, Lorena Jiménez, Ovídio Leon, Rafael Guevara, Mariana H. Staia, Corrosion performance of the plasma nitrided 316L stainless steel, Surface & Coatings Technology 201 (2006) 4424–4429. ISSN: 0257-8972.
  • D. Peix, M. A. Guitar, S. P. Brühl, N. Mingolo, V. Vanzulli, A. Cabo, E. Forlerer, Desgaste por Erosión en Acero Inoxidable AISI 420 Nitrurado por Plasma, Revista Matéria, v. 10, n. 2, pp. 205 – 212, 2005, ISSN 1517-7076.
  • S. P. Brühl, R. Charadia y N. Mingolo, Caracterización por Difracción de Rayos X de un Acero Inoxidable AISI 304 Nitrurado por Plasma; Revista Matéria, v. 10, n. 1, pp. 628 – 634, 2005, ISSN 1517-7076.